Pair a remote control with a [drapery - tubular] motor

1. - Settings Mode

---

Press [Settings] button for 3 seconds, the motor quiver or the light comes on.

2. - Select Channel

---

Press [Left Channel Select] or [Right Cannel Select] to select the needed channel, the corresponding indicator will be on [1 to 7]. To select the 7th channel press both buttons at the same time, all the chanells [1 -6] will on.

3. - Set Channel

---

Press [Settings] button on the back left of the remote control with a sharp tip, the motor will quiver or the light will blink.

4. - Save Settings

---

Press [Settings] button on the motor to confirm the operation.